Search
Show prices tax inclusive Show prices tax exclusive
Show prices tax inclusive
Product Catalogue
    Menu Close

    Shipping: Requires Local

    View as Grid List
    Sort by
    Display per page
    Picture of A Type Universal Valley Trough

    A Type Universal Valley Trough

    73087
    Installation Valley boards should be fitted of sufficient width to provide support for the roofing battens, either: min.12mm ply lay boards set between rafters, or 6mm continuous ply boards laid over the rafters. A single strip of roofing underlay should be laid up the centre of the valley. Counter battens the same depth as the roofing battens should be fitted onto the valley boards. The main roofing underlay should be laid over th counter batten. Roofing battens should be fitted with the ends firmly located onto the valley boards, positioned close to the counter batten, with care taken to avoid damaging the underlay. The fascia board should be cut to allow the GRP valley trough to pass through and discharge into the gutter without flattening out. The end of the GRP valley trough should be trimmed using a fine toothed hacksaw to the appropriate centre line of the gutter - which normally entails a ‘v’ shaped cut. The GRP valley trough should be fitted with care taken to ensure it is centrally located between the valley boards: the sides should be nailed to the counter battens at max: 500mm centres. Warning: Concealed water troughs behind the mortar bonding strip MUST be kept clear and not blocked with mortar. Take care to maintain correct width between cut edges. NFRC recommend that tiles should not be cut in situ and should not be laid dry and then back fill pointed. Properties LEAD REPLACEMENT GRP lasts as long as lead, is tougher, cheaper, more resistant to accidental damage, and is less prone to theft or vandalism. Using preformed GRP valley troughs saves significant installation time over traditional methods. Roofers report elimination of many problems with valley troughs when changing from lead to CORODRAIN GRP. Coloured lead grey as standard (other colours available on request). DURABILITY Made with high quality un-filled polyester resin with glass fibre reinforcement for maximum strength. A tough bonded melinex film gives excellent weathering performance. Minimum life of 30 years. MANUFACTURED IN UK Manufactured to BS EN ISO 9001:2008 quality standard, our automated continuous pultrusion plant in Coventry. All available from stock for rapid delivery to site. NO MAINTENANCE The inherent qualities of the materials make the valleys UV light and acid rain resistant, and the smooth surface finish inhibits the growth of moss, lichen and the build up of debris. Valley Weights Standard valley troughs: 1.64kg/m² Heavy Duty valley troughs: 2.10kg/m² Valley Thicknesses Standard valley troughs: 1.3mm Heavy Duty troughs: 1.6mm
    £31.96
    Picture of B Type Valley Trough

    B Type Valley Trough

    73086
    Installation Valley boards should be fitted of sufficient width to provide support for the roofing battens, either: min.12mm ply lay boards set between rafters, or 6mm continuous ply boards laid over the rafters. A single strip of roofing underlay should be laid up the centre of the valley. Counter battens the same depth as the roofing battens should be fitted onto the valley boards. The main roofing underlay should be laid over th counter batten. Roofing battens should be fitted with the ends firmly located onto the valley boards, positioned close to the counter batten, with care taken to avoid damaging the underlay. The fascia board should be cut to allow the GRP valley trough to pass through and discharge into the gutter without flattening out. The end of the GRP valley trough should be trimmed using a fine toothed hacksaw to the appropriate centre line of the gutter - which normally entails a ‘v’ shaped cut. The GRP valley trough should be fitted with care taken to ensure it is centrally located between the valley boards: the sides should be nailed to the counter battens at max: 500mm centres. Warning: Concealed water troughs behind the mortar bonding strip MUST be kept clear and not blocked with mortar.Take care to maintain correct width between cut edges. NFRC recommend that tiles should not be cut in situ and should not be laid dry and then back fill pointed. Properties LEAD REPLACEMENT GRP lasts as long as lead, is tougher, cheaper, more resistant to accidental damage, and is less prone to theft or vandalism. Using preformed GRP valley troughs saves significant installation time over traditional methods. Roofers report elimination of many problems with valley troughs when changing from lead to CORODRAIN GRP. Coloured lead grey as standard (other colours available on request). DURABILITY Made with high quality un-filled polyester resin with glass fibre reinforcement for maximum strength. A tough bonded melinex film gives excellent weathering performance. Minimum life of 30 years. MANUFACTURED IN UK Manufactured to BS EN ISO 9001:2008 quality standard, our automated continuous pultrusion plant in Coventry. All available from stock for rapid delivery to site. NO MAINTENANCE The inherent qualities of the materials make the valleys UV light and acid rain resistant, and the smooth surface finish inhibits the growth of moss, lichen and the build up of debris. Valley Weights Standard valley troughs: 1.64kg/m² Heavy Duty valley troughs: 2.10kg/m² Valley Thicknesses Standard valley troughs: 1.3mm Heavy Duty troughs: 1.6mm
    £30.68
    Picture of MARK VITOW EN11118 400g  PROPANE GAS PFC

    MARK VITOW EN11118 400g PROPANE GAS PFC

    06053
    £14.55
    Picture of Wienerberger Staffordshire Smooth Blue Solid

    Wienerberger Staffordshire Smooth Blue Solid

    67035
    Production Plant Kingsbury Production Method extruded wirecut Pack Quantity 400 Length x Width x Height 215 x 102.5 x 65 mm Size Tolerance T2 Range Tolerance R1 Gross Dry Density 2190 kg/m³ Compressive Strength >=75 N/mm² (EN 771-1) Thermal Conductivity 0.790 W/(m⋅K) (EN 1745:2012: S1) Durability Designation F2 (EN 771-1) Water Absorption <=7 % (EN 771-1) Reaction to Fire A1 class Active Soluable Salts S2
    £2.03
    Picture of Wienerberger Staffordshire Smooth Blue Perforated

    Wienerberger Staffordshire Smooth Blue Perforated

    67034
    Production Plant Kingsbury Production Method extruded wirecut Pack Quantity 400 Length x Width x Height 215 x 102.5 x 65 mm Size Tolerance T2 Range Tolerance R1 Gross Dry Density 1800 kg/m³ Compressive Strength >=75 N/mm² (EN 771-1) Thermal Conductivity 0.840 W/(m⋅K) (EN 1745:2012: S1) Durability Designation F2 (EN 771-1) Water Absorption <=7 % (EN 771-1) Reaction to Fire A1 class Active Soluable Salts S2
    £1.51
    Picture of Walsall Merchant 85L Pneumatic Wheelbarrow

    Walsall Merchant 85L Pneumatic Wheelbarrow

    64044
    The Merchant shares much of it's design with our bestselling wheelbarrow, the Contractor, but offers a tubular front support to improve weight distribution and increase the overall strength.
    £57.61
    Filters Close
    Min: £0.00 Max: £1,461.00
    £0 £1461