Tools & Site Equipment

Faithfull plastic dustpan complete with a soft bristle PVC banister brush, helps to make cleaning up a simpler task. Clip-in brush for compact storage.

Specification

Width: 220mm (8.3/4in)

The combination of a ratchet cutting action and a lopper style blade makes the Faithfull Pipe Cutter tool highly effective. The blade works against an anvil jaw which holds the pipe securely while pressure is increased. The ratchet mechanism maintains applied pressure so that the handles only need to be opened and closed approximately three times to complete the cut.

Suitable for cutting neoprene hose, polythene pipe or fabric-reinforced solid rubber up to 42mm outside diameter at right angles to the tube.

Faithfull Plug Cutters are used in combination with screwsinks to prepare perfectly sized plugs to fill counterbored holes. For best performance, the power drill should be held in a stand. For a perfect grain match use an offcut from the timber being plugged. To ensure an accurate fit we suggest you use the same screwsink from the Faithfull brand.

The set of 4 contains sizes No 6, 8, 10 and 12.

Set of Four - Cuts size 6 (7mm), 8 (8mm), 10 (10mm) and 12 (11.5mm) Plugs

This Faithfull heavy steel bodied plumb bob has a pointed end to assist when marking out and is available in two weights. A centre and cross hole fixing system permit a line to be attached through the centre line of the bob helping to provide an accurate centre reading.

The plumb bob is a simple to use, essential tool for establishing a vertical or plumb line when carrying out building, decorating and many other projects where an accurate vertical line is required.

Weight: 140g (5oz).

RTR101 DIY Philadelphia pattern pointing trowels with a hardened and tempered steel blade and soft touch handle.

Soft touch handle

Size 150mm (6 in).

These lines are normally used for giving a straight edge for laying bricks etc.

Length: 100m.

These lines are normally used for giving a straight edge for laying bricks etc.

Length: 100m.

Orange polyethylene ranging line is heavier gauge than the brick line and is commonly used for marking out ground on building sites.

Length: 30 metres

Type: Orange Polyethylene

The Faithfull Posthole Digging Bar manufactured from high-grade heat treated steel bar, with a round shank. It has a 60mm (2.3/8in) mushroom head at one end and a 64mm (2.1/2in) bevelled chisel edge at the other. Frequently used for digging deep post holes, and the mushroom head is used for tamping down.

Monument Soldering & Brazing Pad resist temperatures up to 600°C and do not present any of the hazards associated with asbestos material.

2350 Made from woven glass fabric (professional quality).
2351 Made from HDW graphite material (professional quality).

Made in Britain.

Monument 2350X Soldering & Brazing Pad resists temperatures up to 600º celsius, and does not present any of the hazards associated with asbestos material.

Made from woven glass fabric (Professional quality).
Size: 300mm² (12in²).

Superflow heavy duty 310ml Cartridge Sealant Gun, Smooth Action 33% trigger High Pull Ratio, Hook end. Swivel action barrel.

Scan Professional Gel Kneepads are top of the range, made using 13mm thick high-density cell foam with an 'Ultra' comfort gel inner pad for increased comfort in use. Typical applications include kneeling on uneven surfaces, laminate flooring, roofing work, concrete and laying patios etc.

They feature oversized caps - which give added protective coverage to the knee - and have 2 adjustable fastening straps for added comfort and security.

The lower strap is a fully adjustable neoprene strap with a hook and loop fastening and it secures below the knee for all-day comfort. The top strap is elasticated and fully adjustable via means of a quick clip buckle.

Conforms to EN 14404 standard.

This Vitrex 10 2906 is a Professional 20mm Adhesive Round Notch Trowel, it has a rust resistant stainless-steel blade and a large, contoured handle with a soft grip to ensure comfort over prolonged use.
The solid aluminium shank has 9 rivets and is designed to be used by the professional installer.

Specifications:

Blade Size: 115 x 280mm.
Round Notches: 20mm.



Vitrex Professional Notched Adhesive Trowel.

Size: 115 x 280mm (11 x 4.1/2in)
Square Notches: 6mm

This Irwin® ProTouch Retractable Blade Knife is ideal for general maintenance jobs. It has a lightweight, hard-wearing aluminium body which gives 6 times longer life. It also has thicker walls in areas of greatest wear, e.g., nose underside, and heel.
The blades are virtually unbreakable, and have a quick blade change feature, spring-loaded push-button opener. It is designed to fit the hand, allowing maximum grip, and minimum wrist distortion.
The blade slider is held permanently in place whilst a magnet holds the working blade in place. Spare blades are held securely so there is no edge damage, and no rattle, featuring a hinged opening mechanism.
This knife has an optimised cutting angle to minimise fatigue and includes magnetic blade retention, and storage for up to 5 blades.
Patented quick blade release for easy renewal of sharp blade edge.

Fire Safety and Safe Condition signs offer a wide range of safety signs which provides information on Fire Assembly, Fire Exit and Evacuation, Safety Instruction and First Aid Treatment. All our signs conform to the BS EN ISO 7010 regulation, ensuring that all graphical safety symbols are consistent and compliant.

• Advises actions needed to exit your premises in an emergency evacuation situation
• Self adhesive backing
• Making it easy to apply to a clean dry surface
• Designed and manufactured in the UK

The Scan fully coated red PVC gauntlet has a cotton knitted liner that protects against oil, grease and most household chemicals. They have good resistance to abrasions. The palm and finger surfaces provide excellent grip, and also provide hand and wrist protection.

Conforms to EN 388:2016 and EN 420 Standards.

Abrasion Performance Index (1-4): 3
Blade Cut Performance Index (1-5): 1
Tear Performance Index (1-4): 1
Puncture Performance Index (1-4): 1

Size: Large.
Length: 18in/45cm.

Conforms to Standard EN240.

This Monument Steel Radiator Spanner is used on 3/8 in and 10 mm square section radiator vent plugs and bleed screws.
It has a Zinc plated finish with a slightly offset handle.

The Monument Radiator Spanner Air Release Key, 2054X, made from steel, a zinc plated valve spanner and an air release key, with a slightly offset handle.

Specification:

Size: 12mm (Double Ended).

These Faithfull heavy-duty 50mm wide ratchet straps are designed to secure really heavy loads. Manufactured from a 50mm wide triple layer Terylene webbing they are weatherproof, cut and abrasion resistant. The ratchet and J-style fixing hooks ensure that loads are secured quickly and efficiently and provide ease of use.

Both the 5 and 8 metre lengths have a breaking strain of 4,000kg/daN and a working load of 2000kg/daN.


Pack quantity: 1.

Manufactured in accordance to EN12195-2.
NOTE: WEIGHT OF CARGO MUST NOT EXCEED THE WORKING LOAD LIMIT.

The Faithfull FAITDTRUCK52 has the following specifications:
Length: 5m
Width: 50mm
Breaking strain: 4,000kg/daN
Maximum working load: 2000kg/daN

The BlueSpot Ratchet Tie-Down Straps are designed for quick and easy securing and transporting of cargo. They are ideal for cars, trucks, boats, bikes and trailers. They feature a quick thumb release mechanism for easy adjustment and removal of strap. With vinyl coated S-hooks, metal buckle and wide nylon webbing that provides a secure hold without scratching.

Specification

Length: 4.5m.
Width: 25mm.
Load Capacity: 225kg.
Breaking Strength: 450kg.

These Faithfull Ratchet Tie-Downs are manufactured from a 25mm wide triple layer Terylene webbing which is weatherproof, cut and abrasion resistant. The ratchet and S-style hooks ensure that loads are secured quickly and efficiently and provide ease of use.

Manufactured in accordance to EN12195-2.

Specification:

Length: 5m
Width: 25mm
Breaking Strain: 600kg/daN
Maximum Working Load: 300kg/daN

NOTE: WEIGHT OF CARGO MUST NOT EXCEED THE WORKING LOAD LIMIT

Pack quantity: 4.

The Olympia Tools® Reciprocating Saw is fitted with a powerful 900W motor and an adjustable front shoe. A speed preselection wheel increases cutting control. Its easy-to-handle design incorporates a soft grip handle for reduced fatigue. Tool-less blade change ensures less downtime.

Supplied with: 1 x Blade for Metal Cutting and 1 x Hex Key.

Specifications:

Input Power: 900W.
Strokes at No Load: 0-2,800/min.
Stroke Height: 20mm.
Max. Cutting Depth: Wood 115mm, Steel 8mm.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

Tungsten carbide cutting edges and bearing guided, making these trimmers ideal for professional and DIY use. Used when trimming timber, lippings and plastic laminates.

Type: Flush Trimmer 2 flute

Cutting Diameter: 6.3 mm 1/4in

Cutting Length: 25.4 mm

Shank Diameter: 1/4in

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

Tungsten carbide cutting edges are ideal for DIY and professional use. Produces the perfect radius groove on coving, fluting, picture frames and edge moulds when working with softwoods, hardwoods, MDF and plywood.

1/4in Shank.

Cutting Diameter: 10mm

Cutting Length: 18mm.

Radius: 5mm

Shank Diameter: 1/4in

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

Cutting Diameter: 4.0 mm 5/32in.

Cutting Length: 11 mm.

Shank Diameter: 1/4in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/4in Shank

Cutting Diameter: 11.0 mm 7/16in.

Cutting Length: 25 mm.

Shank Diameter: 1/4in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/4in Shank

Cutting Diameter: 12.0 mm 15/32in.

Cutting Length: 19 mm.

Shank Diameter: 1/4in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/4in Shank

Cutting Diameter: 12.7 mm 1/2in.

Cutting Length: 19 mm.

Shank Diameter: 1/4in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/2in Shank

Cutting Diameter: 12.7 mm 1/2in.

Cutting Length: 50 mm.

Shank Diameter: 1/2in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/2in Shank

Cutting Diameter: 12.7 mm 1/2in.

Cutting Length: 63 mm.

Shank Diameter: 1/2in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/4in Shank

Cutting Diameter: 15.0 mm 19/32in.

Cutting Length 25 mm

Shank Diameter: 1/4in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/2in Shank

Cutting Diameter: 15.9 mm 5/8in.

Cutting Length: 50 mm.

Shank Diameter: 1/2in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/4in Shank

Cutting Diameter: 6.3 mm 1/4in.

Cutting Length: 16 mm.

Shank Diameter: 1/4in.

Designed to meet the needs of both the professional tradesman and the home handyman.
All are Tungsten Carbide Tipped, to ensure longevity of working life, coupled with a good quality finish to the work.
This cutter is to be used for bevelling and chamfering.

Cutting Angle Length C 13.0mm
Overall Diameter D 19.1mm
Cutting Angle 45 °
Shank Diameter 1/4in

Manufactured from hard silicon carbide abrasive, rubbing bricks are used for heavy-duty applications such as rubbing floors, cleaning and scouring castings, rubbing down concrete, and removing mould marks. Available in a plain or fluted version.

Most commonly used to clean or dress floor
tiles and concrete floors.
Type: Fluted
Size: 200 x 50 x 50mm (8 x 2 x 2in)

These Faithfull Metal Cutting Sabre Saw Blades are made from Bi-Metal, Bi-metallic blades contain eight percent Cobalt M42, and are particularly suitable for materials that are hard to cut. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S1118BF Saber Saw Blades are ideal for pallet repair, with nails/metal (5-150mm), sheet metal, pipes, aluminium profiles (3-12mm). They have a flexible flush cut.

Specification:

Length: 200mm (8in)
Teeth: 10 TPI

These Faithfull Metal Cutting Sabre Saw Blades are made from HSS Fully-Hardened Super-Speed Steel. Suitable for cutting applications in metal, aluminium and non-ferrous metals. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S918H Sabre Saw Blades are ideal for medium to thick sheet metal (3-8mm) fine, closed pipes and profiles (10-100mm).

Specification:

Length: 150mm (6in)
Teeth: 10 TPI

These Faithfull Metal Cutting Sabre Saw Blades are made from Bi-Metal, Bi-metallic blades contain eight percent Cobalt M42, and are particularly suitable for materials that are hard to cut. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S922BF Bi-Metal Sabre Saw Blades are ideal for thick sheet metal (3-8mm) and for solid pipes/profiles (10-100mm).

Specification:

Length: 150mm (6in)
TPI: 14 TPI

These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S617K Sabre Saw Blades are ideal for coarse wood, free of nails (20-100mm) and pruning green wood (up to100mm). Especially for curved cuts/plunge cuts.

Specification:

Length: 150mm (6in)
Teeth: 3 TPI

These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S1531L Sabre Saw Blades are ideal for coarse fast cuts in wood (tree cutting and pruning).

Specification:

Length: 240mm
Teeth: 5 TPI

These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S1411D Sabre Saw Blade is ideal for coarse wood (20-250mm), wooden panels (up to 150mm), boards, plywood, plastic, pruning green wood (up to 250mm) and is fast cutting.

Specification:

Length: 300mm (12in)
Teeth: 6 TPI

These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S811H Sabre Saw Blades are ideal for coarse wood, free of nails (5-100mm) and pruning green wood (up to 100mm).

Specification:

Length: 150mm (6in)
Teeth: 10 TPI

Scan Safety Helmets are essential for site workers and the safety requirements of workers needing protection from falling objects or striking against fixed obstacles. Manufactured from high density polyethylene and featuring a rain gutter and a six-point polyethylene harness adjustable from 530mm-630mm.

Conforms to EN397:2012 + A1:2012.

Scan Safety Helmets are essential for site workers and the safety requirements of workers needing protection from falling objects or striking against fixed obstacles. Manufactured from high density polyethylene and featuring a rain gutter and a six-point polyethylene harness adjustable from 530mm-630mm.

Conforms to EN397:2012 + A1:2012.

Scan Safety Helmets are essential for site workers and the safety requirements of workers needing protection from falling objects or striking against fixed obstacles. Manufactured from high density polyethylene and featuring a rain gutter and a six-point polyethylene harness adjustable from 530mm-630mm.

Conforms to EN397:2012 + A1:2012.

Scan Safety Helmets are essential for site workers and the safety requirements of workers needing protection from falling objects or striking against fixed obstacles. Manufactured from high density polyethylene and featuring a rain gutter and a six-point polyethylene harness adjustable from 530mm-630mm.

Conforms to EN397:2012 + A1:2012.

he Vitrex Safety Helmet is made from high-density polyethylene and is fitted with a sweatband for extra comfort. Its adjustable internal harness fits most head sizes. Lightweight and comfortable to wear.

Ideal for various DIY projects including building work, structural repairs, tree cutting and lopping.

Conforms to EN 397, CE approved.

The Bahco 3906 Sandflex® Bi-Metal Hacksaw Blades are virtually unbreakable and shatterproof with precision ground teeth for all kinds of metal sawing.

With a blade back of strong, flexible spring steel and a tooth line in high-alloyed, super high-speed steel, this blade is guaranteed to keep its sharpness for a long time.

Carded pack of 2 Bahco 3906 Sandflex Hacksaw Blades 300mm (12in) x 18 TPI

The Bahco 3906 Sandflex® Bi-Metal Hacksaw Blades are virtually unbreakable and shatterproof with precision ground teeth for all kinds of metal sawing.

With a blade back of strong, flexible spring steel and a tooth line in high-alloyed, super high-speed steel, this blade is guaranteed to keep its sharpness for a long time.

Carded pack of 2 Bahco 3906 Sandflex Hacksaw Blades 300mm (12in) x 24 TPI

The Bahco 3906 Sandflex® Bi-Metal Hacksaw Blades are virtually unbreakable and shatterproof with precision ground teeth for all kinds of metal sawing.

With a blade back of strong, flexible spring steel and a tooth line in high-alloyed, super high-speed steel, this blade is guaranteed to keep its sharpness for a long time.

Carded pack of 2 Bahco 3906 Sandflex Hacksaw Blades 300mm (12in) x 32 TPI

The Faithfull Double Scaffold Spanner Holder is made to a high specification using quality heavy-duty hide. This Faithfull holder is made to last and provide dependable service.
It has two loops for scaffold spanners or socket bars, the holder will fit most belts.

Specification:

Size: 150 x 100mm (6 x 4in).

1 x 3M Thinsulate Beanie.

1 x Pair of Heavy Duty Thick Fleece Gloves with smartphone pad.

1 x Adjustable Fleece Snood.

3 Pairs of Scan Orange/Black Knitshell Thermal Gloves. These high-visibility gloves have a black latex wrinkle finish coating to the palm and fingers. They give excellent grip in both wet and dry conditions. Ideal for the construction, automotive and handling industries.

Conforms to EN ISO 21420 and EN 388.

Scan Flexi Safety Glasses are worn for protection against low energy, high speed impacts. These Flexible Safety Glasses are packed with features, including highly flexible arms, soft nose bridge for user comfort, as well as a UV, scratch and impact resistant lens with anti-fog coating. The wrap-around single piece lens of these ultra-lightweight protective glasses also provides maximum peripheral vision.

Conforms to EN166:1F – withstands low energy high speed impacts up to 45m/s (100mph) and EN170.

This Twin Pack contains:

1 x Pair of Clear Lens Safety Glasses for general indoor applications.

1 x Pair of Smoke Lens Safety Glasses for outdoor protection against excessive glare.

Size: L.

These Scan Work Socks have a reinforced heel and toe with an ergonomic shape for optimum fit. The non-slip bridge helps to keep the sock in position for added comfort.

Supplied as a twin pack, 2 pairs included.

Material: 80% cotton, 17% polyamide, 3% elastane.

Supplied as a twin pack, 2 pairs included.

Material: 80% cotton, 17% polyamide, 3% elastane.

This R.S.T. Scarifier is used for scratching plaster undercoat. It has a blue steel blade and its soft touch handle increases user comfort.

Size: 200mm (8 inch).

Disston Screwdiggers fulfil the same function as Screwsinks but the countersinking part can be slid up and down the drill part of the tool.

Ideal for drilling, countersinking and counterboring in one operation.

This means that a No.8 Screwdigger can be adjusted to predrill for different lengths of No. 8 Screw.

Uses 7/64in Drill Bit.

To ensure an acurate fit we suggest you use the same Plug Cutter from the Disston brand.

For No 8 screw

These Faithfull Screwsinks can be used for drilling, countersinking and counter-boring in one operation. The countersinking part can be slid up and down the drill part of the tool by means of a hexagon key to suit the depth of hole being drilled.

To ensure an accurate fit, it is suggested that the corresponding plug cutter is used from the Faithfull range.

Each screwsink is supplied with a hexagon key.

Set of 4 Containing: No.6 (7mm), No.8 (8mm), No.10 (10mm), and No.12 (11.5mm).

For detachable stone dressing combs which are used for preparation of surface prior to re-rendering.

Manufactured to British standard.

Manufactured using silicon carbide abrasive and ideal for sharpening scythes and other agricultural edge tools. Each stone is symmetrical. They are unaffected by climate conditions and designed to cut fast and clean. Use Dry.

Round Tapered
305mm (12 in)

The Vitrex 10 2283 Flexi-Tip Sealant Smoother has a unique flexible tip for superb results on any surface. It is ideal for kitchens, bathrooms, showers, window frames etc.

It is perfect for smoothing most household sealants, fillers, grout etc. and is simple to use and easy to clean.

The Vitrex Self-Adhesive Diamond Tile Drill Kits offer both the necessary lubrication to extend the life of the drill bit and secure positioning for quick and accurate drilling. Uses self adhesive pads for secure positioning and includes water delivery and collection cups for clean drilling.

Use when installing wall fixings through tiles in kitchens and bathrooms, for a wide range of fixtures such as shelves, towel rails or copper pipe.

The Vitrex 102770 Self-Adhesive Diamond Tile Drill Kit System.

Bit Size: 6mm.

The Vitrex Self-Adhesive Diamond Tile Drill Kits offer both the necessary lubrication to extend the life of the drill bit and secure positioning for quick and accurate drilling. Uses self adhesive pads for secure positioning and includes water delivery and collection cups for clean drilling.

Use when installing wall fixings through tiles in kitchens and bathrooms, for a wide range of fixtures such as shelves, towel rails or copper pipe.

The Vitrex 102771 Self-Adhesive Diamond Tile Drill Kit.

Bit Size: 8mm.

This Faithfull Single Wheel Glass Cutter has a tungsten carbide wheel and is ideal for the occasional user.
The metal die-cast handle features various sized notches for nibbling away waste glass after cutting.

Faithfull Slaters Ripper for sliding under slates to pull out or sheer off fixing nails prior to replacing with new slates. Features a flexible steel blade with PVC grip.

Faithfull Sledge Hammer for general use, ideal for builders and contractors. Both striking faces are precision ground, specially hardened and heat treated to withstand the highest impact applications. Virtually unbreakable fibreglass shaft with a soft-grip, non-slip handle and overstrike protection.

The Stanley sliding pocket knife has an all metal construction, making it solid, reliable and long lasting. It allows easy blade change, with no tools required, meaning that it is easier and faster than a standard utility knife.

The knife's one-handed operation blade slider extends the blade easily and quickly. A push down and slide safety feature ensures that the blade is not accidentally extended. For convenience, the knife is pocket sized and has a metal belt clip for easy carriage.

Accepts all standard Stanley blades (11-911, 11-921, 11-983).

Monument force cups or plungers are used to remove blockages from bath and sink waste pipes by building up the air pressure.

This sturdy float is a lightweight one piece polyurethane moulding. The pattern face is non-absorbent and is used for applying plaster, cement and other building materials.

Small Float Size: 280 x 110mm (11 x 4 1/4 in)

These Stanley Snap-Off Blades have a straight cutting edge and fit Stanley snap-off knives.

Available Sizes: 9mm, 18mm and 25mm.

The 25mm blades are 1mm thick and have been specifically designed for intensive use.

These Stanley Snap-Off Blades are 18mm and have 7 snap-off segments. They are suitable for use with the following 18mm snap-off knives: STA010481, STA010418, STA010018, STA010280, STA010151, STASTTKQ118.

Pack of 5.

These Stanley Snap-Off Blades have a straight cutting edge and fit Stanley snap-off knives.

Available Sizes: 9mm, 18mm and 25mm.

The 25mm blades are 1mm thick and have been specifically designed for intensive use.

These Stanley Snap-Off Blades are 9mm and have 12 snap-off segments. They are suitable for use with the following 9mm snap-off knives: STA010475, STA010409, STA010095, STA010150, STASTTKQ109.

Pack of 10.

The Faithfull Soft Broom is a low cost plastic broom with soft PVC bristles complete with a tubular steel, thread fitting handle. Supplied with a handy hanging bracket.
Width: 300mm (12in). Handle length: 1.2m.

The Faithfull Soft Coco Broom is a by-product of coconut harvesting. Natural coco brushes are softer when compared to other natural brooms, but still provide good sweeping characteristics. This broom should only be used in dry conditions.

The Faithfull 8 Piece Screwdriver Set is a versatile set featuring the seven most popular Slotted, Phillips and Pozidriv screwdrivers, with correctly hardened and tempered Chrome Vanadium steel blades and full size bi-material soft-grip handles for maximum user comfort and firm non-slip grip.

The set also contains a useful Magnetizer / De-magnetizer for use on screwdriver tips for screw retention and retrieval.

The set is supplied in a handy plastic storage case. Contains

3 x Slotted: 3.0mm x 75mm, 5.0mm x 125mm, 6.0mm x 150mm
3 x Pozidriv: PZ1 x 75mm, Stubby PZ2 x 38mm, PZ2 x 100mm
1 x Phillips: PH0 x 60mm
1 x Magnetizer/ De-Magnetizer

The Vitrex 102207 Tile Saw has an extra deep steel frame for improved cutting access. Its 150mm tungsten carbide blade, cuts in any direction. Soft-grip handle for extra comfort.

Cutting depth of 150mm - to the centre of a 300mm tile.

Spare Blade (VIT102203)

Monument pipe cutter wheels are made from high quality, heat treated steels.

Suitable for both 268 and 289 pipe slices 15 mm and 22 mm copper tube and MON 240C and MON 303 21 mm and 28 mm.

Monument pipe cutter wheels are made from high quality, heat treated steels.

Monument 273A Spare Wheel for Tube Cutters size 0 , 1 , 2A, TC3.

General purpose for copper, brass and aluminium tube.

The Faithfull polyurethane backed Sponge Float for finishing grainy surfaces such as sand and cement mix, or for applying certain plaster finishes.

Faithfull Centre Punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully hardened and tempered and with a 90° ground point.

Point Diameter: 2.5mm (3/32in).
Length: 100mm (4in).

Faithfull Centre Punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully hardened and tempered and with a 90° ground point.

Point Diameter: 3mm (1/8in).
Length: 100mm (4in).

Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact.

Designed to drive nail heads below the surface of the wood.

Point Diameter: 4.0mm (5/32in)
Length: 100mm (4in)

Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact.

Designed to drive nail heads below the surface of the wood.

Point Diameter: 5mm (3/16in)
Length: 100mm (4in)

The Roughneck® Square Point Shovel is strong yet lightweight, with a fully hardened pressed steel construction. Treads on the blade allow for increased pressure to be applied with reduced risk of slippage.

The Power Ring socket, steel reinforced plug, provides stronger blade to handle connection. It has a fibreglass shaft for reduced overall weight, with a comfortable, double-injected D grip handle. Ideal as a general-purpose shovel for moving sand, gravel, cement, earth and for shovelling out and filling trenches.

Specification

Blade Width: 215mm
Overall Length: 914mm (36in)

The Roughneck® Square Point Shovel is strong yet lightweight, with a fully hardened pressed steel construction. Treads on the blade allow for increased pressure to be applied with reduced risk of slippage.

The Power Ring socket, steel reinforced plug, provides stronger blade to handle connection. It has a fibreglass shaft for reduced overall weight, with a comfortable, double-injected D grip handle. Ideal as a general-purpose shovel for moving sand, gravel, cement, earth and for shovelling out and filling trenches.

Specification

Blade Width: 215mm
Overall Length: 914mm (36in)

Vitrex Standard Diamond Blade with a continuous rim for a cleaner cut. Suitable for cutting ceramic, terracotta and quarry tiles, slate, marble, masonry, concrete and stone.

Wheel supplied with 22mm dia bore, and is supplied with a 16mm brass reduction ring.

For use with Vitrex 103402NDE.

Diameter: 110mm.

These Faithfull Standard Padsaw Blades are designed to fit most brands of padsaws, keyhole saws and pocket saws.
They are made from high quality tempered carbon silicon steel and are suitable for cutting wood, plastic and plasterboard.

Specifications:

Length: 250mm (10in).
Pack Quantity: 2.

These Faithfull Standard Padsaw Blades are designed to fit most brands of padsaws, keyhole saws and pocket saws.
They are made from high quality tempered carbon silicon steel and are suitable for cutting wood, plastic and plasterboard.

Specifications:

Length: 250mm (10in).
Pack Quantity: 2.

The Stanley 0TR250 Heavy-Duty Staple & Nail Gun is fitted with an easy push handle penetrating the staple or nail into the workpiece with ease. The pinch point free design helps to protect cables so they do not to get crushed on application.
This Stanley gun has an aluminium cast housing for greater durability and strength, is fitted with Hi/Lo adjustment to match density of materials and has easy access staple and brad insertion for faster loading.
This staple and nail gun has a lock down handle system fitted for easy storage. It will accept heavy-duty staples and brads for multiple applications from cable laying, upholstery work, fencing, architrave fitting and much more.

It will fire - STANLEY® Type-G staples in 6mm (1-TRA704T), 8mm (1-TRA705T), 10mm (1-TRA706T), 12mm (1-TRA708T) and 14mm (1-TRA709T) and STANLEY® Type-J Headed Brad Pins in 12mm (1-SWK-BN050T) and 15mm (1-SWK-BN625T).

This 60 1/2 Block Plane features a low angle cutter seat at 13.5° and is fully adjustable for depth-of-cut, cutter alignment and size of mouth. The body is made from a fine grey iron.
Particularly effective on end grain and plastic laminates.
Supplied with a pouch for convenient storage.

Cutter Width: 35mm.
Length: 150mm (6in).

This Stanley Adjustable Quick Square has a black body with yellow graduations providing maximum readability in all light conditions. It features the Common Jack and Hip and Valley scales.
This square has a heavy-duty construction, and it is multipurpose with an adjustable design which means it can be used as a rafter square, saw guide.

Specification:

Size: 170mm (6.3/4in).

This Stanley Magnetic Bit Holder has been precision machined. The magnetic recess holds 1/4in insert bits securely when in use.

Sold singularly or as a box of 5 bits.

Length: 60mm